what robot deployment means :
Robot deployment is the work of taking a robot behavior that works in the lab and making it run, unattended and repeatedly, at a real site : installing it, proving it under the site's conditions, rolling out changes, and keeping evidence of how it performs.
installing the software is the short part. the long part is the proof, and it is where most of the schedule goes.
six steps to deploy a robot :
- define the task. write the success criteria as numbers : lift at least 20 cm, hold at least 1 s, return and release. a task nobody defined cannot be passed or failed.
- record a baseline. run the behavior in the lab and keep every run with its code, model, dependencies and hardware. this is what every later result is compared against.
- test under site conditions. list the lighting, layouts, objects and surfaces the robot will meet, and run enough trials per condition to state a success rate with an interval. the math is in robot reliability testing.
- run the pilot. record every run on site, not only the failures, and keep the data where your team and the customer can both check it.
- roll out in stages. start with a few robots, compare them against the baseline, then widen. coordinating the robots themselves is the job of robot fleet management.
- re-check every change. a new policy, a calibration, a dependency or a replaced part is a new deployment in miniature, and it gets compared before it ships.
where robot deployments slip :
robots running learned behaviors never act the same way twice. when a deployment slips, engineering, the integrator and the site each have a theory, and nobody can show whether a change made things better or worse.
in one pilot, 30% of an actuator maker's units started failing on the end-of-line test and stayed that way for weeks. the cause was an HVAC unit reporting the wrong temperature. with every run recorded, finding it took 20 minutes instead of 4 days.
the documented cases and the numbers behind them are in why robot deployments fail, and the engineering answer to each gap is in closing the physical AI deployment gap.
deploying a learned policy :
a policy that scores well on a benchmark is promising. a policy that is ready to deploy has been measured under the conditions of this site, with enough runs to put a number on it. the playbook is in robot policy evaluation, and the step-by-step workflow for an update is in validate a robot policy update before deployment.
the record a deployment needs :
a deployment is defended with records, not with memory. the reasoning is in robot deployment reliability. on fleets, an independent view of the conditions around each run helps settle what the robots' own logs cannot : that is the role of a robot fleet supervisor.
a robot deployment checklist :
- the task and its success criteria, written down before the first run
- a recorded baseline, with the code, model and hardware behind it
- the site's operating conditions, listed, including the untested ones
- a success rate per condition, with an interval
- every pilot run saved, failures kept for replay
- a comparison against the baseline before each update ships
- a named owner for the go or no-go decision
- a record the customer can check, kept where they can reach it
frequently asked questions :
How do you deploy a robot in production ?
Define the task and its success criteria, record a baseline in the lab with the full system state, test the behavior under the conditions of the actual site with enough runs to state a success rate, run a pilot where every run is recorded, then roll out in stages and compare every later change against the baseline before it ships.
How many test runs do you need before deploying a robot ?
More than most teams expect. Ten clean runs out of ten only supports claiming a success rate above roughly 74% at 95% confidence. The number of runs depends on the reliability you need to claim and on how many operating conditions the site has, and each condition needs its own runs.
What should be recorded during a robot pilot ?
Every run, not only the failures: the recording itself, the code revision, the model, the dependencies, the robot and sensor configuration, the operating conditions and the task outcome. Without the context behind a run, a later failure cannot be compared with the runs that worked.
How do you deploy a new robot policy to a fleet safely ?
Keep the deployed version as a fixed baseline, run the candidate policy on a small number of robots, compare its results against the baseline per condition, and hold back the conditions where it got worse. Roll out to the rest of the fleet only for the cases the evidence covers.
the demo shows the robot can do it. the deployment shows it keeps doing it.
start with a free reliability audit : share run data from one robot behavior and we will show you where it fails and why.
Robot failing in the field? Get help now